If the percentage Lycra content of less than 10%, then the likelihood is high that pantyhose would just hang, or wrinkle, because the material is only present in the zone. If you see a symbol on the packaging Lykra 3D, then you know what – it's three-dimensional lycra, which allows you to create high-quality thin pantyhose. Microfiber – nylon thread, which is a large amount of finer yarns, yarns that give softness, softness and strength. These tights are usually warmer and more durable, but more expensive. Tights microfiber tights are the best choice in winter. Often the manufacturers do tights with the addition of Acrylic – artificial wool, which are cheaper microfiber tights. However, these tights come quickly pellets, and wearing them will be possible only under pantyhose bryukami.Tsvet As you know well-chosen color pantyhose in combination with other parts of your wardrobe can accentuate your personality and taste. For example, long been known that dark-colored tights visually lengthen the leg, and white – visually shorten it.

Color tights must be combined with the tone of your clothing and shoes should be darker than the color of tights. Despite the abundance of the different colors offered by manufacturers of tights, will remain the most pressing flesh color (Miele) and black (Nero). Companies realize pantyhose wholesale, pick up top-selling colors at manufacturers of tights, to try to facilitate the selection order associative names, for example Bronzo (Bronze), Cappuccino (Cappuccino), Chocolate (Chocolate) in resulting in easier to imagine how will look like this or that on your tights tights tights nozhkah.Priznaki quality is very short-lived, however, buying a new pair of tights should not only pay attention to price.

Vest, worn by members of the Convention, the 'unbelievable' was so short that barely reached the middle of the chest. They wore coats of disproportionate size, napoleons to the ankles, too broad or too tight striped pants. A distinctive feature was a tie, closed the half-face. Complement this 'ensemble' earring in his left ear and knotted stick instead of an elegant cane. The girls, to match the gentlemen, cut their hair short at the back, worn around the neck scarlet ribbon-like trail knife of the guillotine. They draped themselves with red shawls – like a scarf, which the executioner Sanson draped on the shoulders of Charlotte Corday. The legs were decorated with bracelets and smartly lifted skirts. Their heads are decorated with elaborate bows and huge bonnets.

By the way, belonged to merveyez and Josephine de Beauharnais, the future wife of Napoleon. Youth had its own jargon and shock the public not only in appearance, but also manners, pointedly stressing the hostility to the revolutionary traditions and the rejection of simplicity in dress. Nihilists 60s of the XIX century, claim the title of 'new force', also shocked the audience of his clothes. They used all the means in order to isolate and to become "not of this world '. Here is a description Skabichevsky that paints us look young at the time. 'Desire nothing to resemble the despised Philistines stretched to the very appearance of new people, and thus way, there were the notorious nihilistic costumes in which sported youth during the 60s and 70s.

It should be borne in mind that without a quality cover modern office interior unthinkable. What counts as "quality floor? Of course, it should be smooth, durable (have a high resistance to abrasion), "warm" (a well-insulated room from the cold floor), easy to clean and meet hygiene and fire protection requirements (ie not emit any harmful substances and does not burn). Fortunately, today there are technologies and materials that would accommodate all of these conditions and, if not entirely avoided, then significantly reduce the time and money costs. The first step is to decide which floor installed in the building and whether there were significant differences floor level. Usually, if the overlap is made of reinforced concrete plates, the level drops very low.

In this case, the problem is simplified. Quickly and accurately update the flooring in this situation, you can simply lay a carpet or linoleum over the old coating, if this flooring or tile. If precursors are also "soft" coverage, they want to remove, however, it usually does not take much time. If floors are too rough, and it often happens in old buildings with wooden interfloor floors, the willy-nilly will have to open them. Do not do this without the new device easy tie. And foreign and domestic manufacturers produce special multicomponent self-leveling mixture (Knauf, "Eunice") capable of significantly facilitate and expedite the work. If the device is a new tie for whatever reason do not wish, quickly and accurately align the floor to help the system controlled by the lag, on which layer (intermediate layer of the floor on which fits topcoat) and the actual floor.

It would seem that the answer is obvious, once we walk across the floor and almost all its life in the bottom of the flat (rare moments of replacement bulbs can be neglected), the heaters must have a floor. It seems to be true, if not … but one infrared rays (or as they are called doctors "rays of life") subject to the laws of optics. So, with underfloor heating infrared energy is distributed in all directions and absorbed by objects that occur on the road, the air is out, it is transparent to infrared radiation as well as for visible light). Across the floor – the ceiling. This means that warmed the ceiling? Yes, but do not jump to conclusions, this effect is less noticeable when using films with a solid the heating layer as a heating systems STB, but basically there is a "striped" films due to higher temperatures and lower bands of the radiation wavelength. But if the ceiling surface to place a reflector foil for example, or metalized film, almost all thermal energy back down and absorbed by the floor (approximately 40% savings).

The second option – placing the film on the ceiling. Well, there seems to be quite simple, once the floor warms the ceiling, then Ceiling heaters must heat the floor. So it is. And if the supply ceiling insulation (for that would heat the contact method of heating the film does not go into slabs) and the reflective layer (for that would direct infrared radiation in the desired direction), we obtain an effective heating system. The beauty of such a heating system with the ability of rapid acceleration, which is good if you use an infrared heat occasionally. Cons – it is not clear why heat the upper surface of the furniture.

And the last option – the wall. This method of placement is relevant to the creation of local "hot corners" in the room. Then the heat is absorbed directly a man who does not want to spend money on heating of the space where it is not. What happens? And get this. Location of the film in a room depends on the specific conditions of design features space, fullness furniture, and other factors. Absolutely correct and the only true answer to the question posed in the title there. But there is a choice. A choice – it's free. Be free to choose the comfort of heating systems. PS Someone might say – so many nuances and complexities? My answer – in any of these options, film infrared heating system much more efficient than the traditional one. For her future.